BIGTREETECH TMC2209 V1.3 Stepper Motor Driver
BIGTREETECH TMC2209 V1.3
Avoid losing steps and shaking, the gold immersion process has good heat dissipation and is super quiet.
Working mode: STEP/DIRECT, UART
_UART mode, already soldered.
As shown in the figure on the right, if Pin 5 is used as a UART Pin, the resistor will be removed and soldered to the following two pads.
_UART mode of TMC2209 V3.0 connection to motherboard
Potentiometer adjustment instructions
1. Turn the potentiometer clockwise: decrease Vref to decrease the control current
2. Turn the potentiometer counterclockwise: Increase Vref to increase the control current.
1. When installing the driver into the motherboard, pay attention to the direction of the drive, it cannot be inserted backwards, to avoid the drive being burned.
2. Make sure to do a good job of heat dissipation (heat sink + fan) before operating, to avoid the inverter from operating abnormally.
_Specification
Operating Mode: STEP/DIR or UART
Power Voltage (VM): 4.75V—28V DC
Peak Current: 2.8A
Current RMS: 2A
Max Microsteps: 256
Microstep Setting: 2, 4, 8, 16 (can be divided into 256)
**To get the best price, please contact the shop directly:
0913.939.775 contact A.Quan (for English)
094.144.0951 contact A.Quynh
**Selling price does not include VAT (+10% if VAT invoice is issued)
Reviews
There are no reviews yet.