BIGTREETECH Octopus Pro V1.0 3d printer control board

BIGTREETECH Octopus Pro V1.0 3d printer control board
【Main control chip】The main control board uses ARM-class 32-bit Cortex-M4 chip STM32H723ZE/STM32F429ZE/STM32F446ZE with frequency up to 168MHz and flash is 1MB.

【Support 60V Input】Support 3D printer motherboard up to 8 stepper motors up to 60V. Motor drive power supply supports up to 60V input (only for motor drive power supply).

【6 Controllable Fans】Up to 6 controllable fans, two fans are normally open and both support power supply voltage, 12V, 5V options.

【Firmware Update: Klipper/Marlin/RRF】Supports firmware updates via DFU mode. This is where the firmware is sent directly to the board from the PC and does not require a bootloader, however this method is not recommended for novice users as discussed later in this document.

【Level Conversion IC】Support proximity sensor, optional pull-up resistor jumper, support more models, support BL Touch.

***Download firmware => https://github.com/bigtreetech/BIGTREETECH-OCTOPUS-V1.0/tree/master/Firmware

**To get the best price, please contact the shop directly:
0913.939.775 contact A.Quan (for English)
094.144.0951 contact A.Quynh
**Selling price does not include VAT (+10% if VAT invoice is issued)