eSun eTwinkling 3d printing resin with sparkling star effect 1kg/Roll

eSun eTwinkling 3d printing resin with sparkling effect 1kg/Roll
_eTwinkling is based on PLA material, which is characterized by the ease of printing of PLA filament.
_eTwinkling PLA filament adds ultra-fine glitter powder to create a shimmering effect.

eTwinkling-PLA
_Tinkling sparkling effect
_Low shrinkage: no warping, no cracking
_High precision: smaller wire, diameter tolerance

_Twinkle Little Star
On the basis of PLA raw material, add fine glitter powder to print the model. It will give you a rich visual experience.

_Smaller wire diameter tolerance
The wire diameter tolerance of consumables is controlled within ±0.03mm, and the printing effect is better.

_NO warping, NO cracking: Good printing stability

_Environmentally friendly raw materials:
No mixed waste, recycled materials discharge smoothly without discoloration

_Characteristic:
+Special sparkling color.
+Easy to print like PLA

**Application: toys and decoration
Printing Accessories, Decorations, Toys, Sculptures, Artworks, functional parts of cases and more.

**Note: This material is not easy to bend due to its high hardness. Try to avoid bending when feeding.

***Fiber Properties Table
+3D PRINTING FILAMENT: eTwinkling
+Density(g/cm3): 1.41
+Heat Distortion Temp(℃,0.45MPa): 67
+Melt Flow Index(g/10min): 2.5(190℃/2.16kg)
+Tensile Strength(MPa): 58
+Elongation at Break(%): /
+Flexural Strength(MPa): 70
+Flexural Modulus(MPa): 2100
+IZOD Impact Strength(kJ/㎡): 4
+Durability: 4/10
+Printability: 9/10

***Recommended printing parameters
+Extruder Temperature(℃): 200 – 230℃
+Recommended temperature：210℃
+Bed temperature(℃): 45 – 60°C
+Fan Speed: 100%
+Printing Speed: 40 – 100mm/s
+Heated Bed: Optional
+Recommended Build Surfaces: Masking paper, PVP solid glue, PEI

**To receive a better price, please contact the shop directly.
0913.939.775 contact A.Quan (for English)
094.144.0951 contact A.Quynh
**Selling price does not include VAT (+10% if VAT invoice is issued)