_EPLA-LW (Lightweight PLA) is a material specially developed by eSUN for the fields of model aircraft, drones and COSPLAY. Compared with WOOD, ePLA-LW has a more stable interlayer bond, and the foaming speed and strength can be controlled by adjusting the printing temperature. Using active foaming technology to achieve light, low-density PLA parts. The foaming volume ratio is 220%, and when printing the same volume pattern, 1 roll of ePLA-LW can be used as 2.2 rolls of ordinary PLA. The foaming makes the layer pattern almost invisible, and the surface of the printed product is matte and delicate. At around 210-270°C, the material starts to foam during printing, increasing its volume by almost 1.2 times, and the print extrusion speed can be reduced to 45% for printing lightweight parts.
_Under the same aircraft model and at the same speed, the use of lightweight PLA allows the model aircraft to have a lighter wing load and lower stall speed. For models such as aircraft, under the condition of balanced strength, reducing the weight as much as possible can significantly improve the performance of the aircraft.
+Low density, up to 0.54g/cm3
+The foaming volume ratio is 220%, and 1 roll of ePLA-LW is equivalent to 2.2 rolls of conventional PLA
+Adjust the firmness and foaming rate
+Excellent surface effect, matte and delicate
+Good adhesion between layers, explosion-proof and easy to repair
+Easy to paint, strong surface paint adhesion
+Excellent printability, large models without warping, no clogging and no need for a stable temperature chamber
*Note: Printing test conditions: nozzle 190-280℃; layer height 0.2mm; bed 45℃; speed 40mm/s
*Product Features:
_Application: Active foaming technology is used to realize light weight and low density PLA parts, specially designed for the fields of aircraft model, drone and COSPLAY.
_Lighter weight: Following the same model and same speed, ePLA-LW allows the aircraft model to have a lighter wing load and lower stall speed.
_More saving: Printing the same sample volume, 1 roll of ePLA-LW can be used as 2 rolls of normal PLA, saving 55% of filament compared to normal PLA.
_Excellent printing effect: Basically invisible pattern layer, excellent translucent and delicate effect after printing. Easy to paint and the pigment surface has strong adhesion.
_Vacuumed Sealed Packaging: Net Weight: 1KG. ESUN filament comes sealed vacuum bag with a desiccant bag to keep dry and avoid dust and foreign particles, preventing nozzle jam and yielding smooth 3D models.
*Pay attention to the maximum operating temperature of the printer. Most Teflon tube printers cannot operate for a long time above 250℃. Long-term printing above this temperature may cause clogging. If the temperature exceeds 250℃, a high-temperature printer such as a metal tube is required for printing.
**For further support on product price and information, please contact:
0913.939.775 contact A. Quan (for English)
094.144.0951 contact A.Quynh
**Selling price does not include VAT (+10% if VAT invoice is issued)
Reviews
There are no reviews yet.