ESUN ePLA-Matte premium 3D printing plastic is harder than ABS, durable like PC 1kg/Roll

ESUN ePLA-Matte Premium 3D Printing Plastic 1kg/Roll
_ePLA-Matte is a cost-effective, environmentally friendly and easy to print PLA material.
_Compared with ABS, ePLA-Matte has higher hardness and PC-like strength and does not require a closed cavity, low shrinkage quality, no warping and no cracking, suitable for large-size model printing;
_Supports easy peeling from the surface with smooth and flat contact surface;
_There will be no unpleasant smell during printing, safe and environmentally friendly;
_And the reel is made by reusing PETG, ABS, PLA production waste and other industrial waste injection molding, and the outer box is made of recyclable paper. Make 3D printing more sustainable with the concept of environmental protection;
_The matte surface is delicate and does not show layer lines;
_The plastic filament is not easily broken, allowing printing to run smoothly for a long time without clogging.
_It can be used for initial concept models and rapid prototyping.
_Low density, ePLA-Matte 21% consumes more consumables per roll than other PLA matter (matte) product printing models.
+Friendly environment
+Cost effective
+High speed printing
+Easy to remove support
+Excellent printing ability
+ Hard to break (cracked tank…)
+Very nice matte surface effect
+Low density

_Fiber properties table:
+3D PRINTING FILAMENT ePLA-Matte
+Density(g/cm3) 1.174
+Heat Distortion Temp(℃,0.45MPa) 51
+Melt Flow Index(g/10min) 2.1（190℃/2.16kg）
+Tensile Strength(MPa) 34.56
+Elongation at Break(%) 56.1
+Flexural Strength(MPa) 41.21
+Flexural Modulus(MPa) 1119.41
+IZOD Impact Strength(kJ/㎡) 33.15
+Durability 4/10
+Printability 9/10
_Recommended printing parameters
+Extruder Temperature(℃) 190 – 230℃
+Recommended temperature 215℃
+Bed temperature(℃) 45 – 60°C
+Fan Speed 100%
+Printing Speed 40 – 100mm/s
+Heated Bed Optional
+Recommended Build Surfaces Masking paper, PVP solid glue, PEI

***If using a machine with an Indirect extruder:
+Initial Layer Speed (first layer): 10mm/s
+Print Speed: 35-40mm/s
+Fan Speed: 40%
+Printing Temperature (Extruder temperature): 230-235℃, I set it at 230℃
+Build Plate Temperature: 65-70℃
***Remember to turn on Brim

***See more if there is a problem when printing: https://www.esun3d.com/uploads/ePLA-Matte-printing-problem-solutions.pdf
**Video of Lucky Cat test print from ePLA-Matte plastic in Mint Green: https://www.youtube.com/watch?v=lTIWwnvYcp4

**For further support on product price and information, please contact:
0913.939.775 contact A. Quan (for English)
094.144.0951 contact A.Quynh
**Selling price does not include VAT (+10% if VAT invoice is issued)