BIQU H2 V2S Lite extruder for 3d printer

_Lighter and Better Heat Dissipation With a hollow design with visible internal structure, the H2 V2S Lite weighs only 175g, contributing to reduced inertia and more precise positioning

_Fast cooling
At the same time, the airflow is also improved for better heat dissipation. Together with the heatsink and fan, the H2 V2S Lite provides highly efficient cooling.

_Higher throughput. Faster printing
Using a 0.6mm brass nozzle and longer heating block, the H2 V2S Lite can achieve a print speed of 45mm³/s to meet the demand for faster printing.

_Labor saving lever
Upgrade needed, a convenient and labor-saving design, eliminating the need to hold the handle continuously when installing or removing the filament.

_Fast heat separation
Now with the quick-release design, you can remove the thermal cut-out by simply using the hex key, making maintenance much easier and more convenient.

_Has a dual gear system to provide exceptional thrust, ensuring smooth feeding and flexible retraction.

_Adjustable plastic fiber load
Simply rotate the tension screw to suit different filaments, improving the printing success rate.

_It can be compatible with BIQU B1, BIQU BX Ender-3, Voron 2.4, Voron V0 and Vzbot…
_Aluminum Alloy Housing Crafted from H2 V2S Lite aluminum alloy built for high strength, durability, corrosion resistance and above all, light weight

_Fiber drive gear: Made of tool steel with nano-coating to improve hardness, wear resistance, corrosion resistance and provide longer life when printing abrasive materials

_Idler Arm: Made of 7075 T6 aluminum, with special high performance anti-wear Mos2 grease blend to improve quick release lever response and enhance wear resistance

_Heat Break: H2 bimetallic (copper alloy + grade 5 titanium alloy). High performance thermal grease has been pre-applied to the heatsink to increase the heat conduction between the heatsink and the heatsink to improve cooling performance

_More mounting holes: 4 screw mounting holes available for auto-balancing sensor cooling fan installation
(Note: The faucet is custom made and will be released at a later date.)

+Extrusion Method: Dual Gear Extrusion
+Maximum Printing Temperature: 270℃
+Weight: 175g (including Heater Cartridge, Thermistor, and Fan)
+Maximum Extrusion Force: 7.5kg (depending on the filament)
+Extrusion (based on the existing): 2700mm3/min (depending on the filaments)
+E-step: 932/mm at 16 microstep (Further calibration is recommended)
+Klipper Rotation Distance: 3,433
+Recommended Motor Current: 800mA
+Gear Ratio: 7:1
+Drive Gear Circumference: 24.5mm
+Filament Diameter and Tolerance: 1.75±0.05mm
+Thermistor Type: NTC100K
+Heater Cartridge Power: 70W
+Heater Cartridge Voltage: 24
*Note: Not compatible with standard NEMA14 motors

**To receive a better price, please contact the shop directly.
0913.939.775 contact A.Quan (for English)
094.144.0951 contact A.Quynh
**Selling price does not include VAT (+10% if VAT invoice is issued)