High quality eSun ePLA-Gloss 3D printing plastic 1kg/Roll

High quality eSun ePLA-Gloss 3D printing plastic 1kg/Roll
_ePLA is a low cost, environmentally friendly, easy to print, high performance PLA material.
_Compared with ABS, ePLA has higher stiffness and strength similar to PC, no need for closed cavity, low shrinkage rate, no warping, no cracking, and can print large-size models;
_Compared with other materials, support is easier to remove from the model, and the surface of the printed model is smooth and flat;
_No pungent smell when printing, safe and environmentally friendly;
_Plastic spools are made of plastic injection molding based on manufacturing waste and industrial waste such as PETG, ABS and PLA.
_The outer box is made of recyclable paper.
_The eco-friendly concept makes 3D printing more sustainable.
_Smooth and glossy surface;
_The filament is hard to break, long-time printing is smooth without plug, can be used for concept models, rapid prototyping.

+Green and environmentally friendly
+Low cost high efficiency
+High speed printing
+Support easy removal
+Easy to print
+Hard to break
+Glossy exterior

_Fiber properties table:
+3D PRINTING FILAMENT ePLA-Gloss
+Density(g/cm3) 1.26
+Heat Distortion Temp(℃,0.45MPa) 56.70
+Melt Flow Index(g/10min) 3.3(190℃/2.16kg)
+Tensile Strength(MPa) 64.51
+Elongation at Break(%) 31.54
+Flexural Strength(MPa) 68.99
+Flexural Modulus(MPa) 1514.78
+IZOD Impact Strength(kJ/㎡) 7.9
+Durability 4/10
+Printability 9/10

_Recommended printing parameters
+Extruder Temperature(℃) 190 – 230℃
+Recommended temperature：210℃
+Bed temperature(℃) 60°C
+Fan Speed 100%
+Printing Speed 40 – 100mm/s
+Heated Bed Optional
+Recommended Build Surfaces Masking paper, PVP solid glue, PEI

**For further support on product price and information, please contact:
0913.939.775 contact A. Quan (for English)
094.144.0951 contact A.Quynh
**Selling price does not include VAT (+10% if VAT invoice is issued)